HPE6-A42 Online Practice Questions and Answers

Which task can an Aruba Air Monitor (AM) perform?

A. Analyze wireless traffic patterns at the application level.

B. Optimize RF through the AP channel and transmit power plans.

C. Analyze RF signals to determine the cause of non-802.11 interference.

D. Help to detect rogue APs in the environment.

A network administrator wants to use unique digital certificates installed on user devices to authenticate wireless users. Which EAP method should the RADIUS server and clients support?

A. PEAP and MS-CHAPv2

B. EAP-TLS

C. EAP-TTLS and MS-CHAPv2

D. LEAP

A company has a Mobility Master (MM)-based solution. How does a Mobility Controller (MC) behave if it loses contact with all MM nodes?

A. The MC loses all licenses and cannot support APs or clients.

B. The MC retains its current licenses for 30 days.

C. The MC contacts Aruba Activate and uses the licensing limits defined there.

D. The MC maintains only licenses that have been locally installed on it.

What is a key difference between an Aruba Air Monitor (AM) and an Aruba Spectrum Analyzer (SA)?

A. An AM detects threats such as rogue APs, while an SA analyzes RF conditions.

B. An AM detects rogue APs and provides data services to clients, while an SA only detects rogue APs.

C. An AM scans on only one 802.11 frequency band, while an SA scans on both 802.11 frequency bands.

D. An AM both detects wireless intrusion attempts and mitigates them, while an SA only detects wireless intrusion attempts.

A company wants to provide wireless access for visitors with their Aruba solution. Which configuration feature enables the guest to access the wireless network without authentication?

A. use of internal captive portal with email registration

B. addition of custom rules to control access for unauthenticated guests

C. use of internal captive portal with authentication

D. redirection of guests to an external captive portal that provides encryption services

Refer to the exhibits. Exhibit 1

Exhibit 2

A company has a Mobility Master (MM)-based solution with a guest WLAN. Users can connect to the WLAN, but they receive the error shown browser rather than see login page. Exhibit 2 shows the status for one of the guest clients.

What is one issue that could cause the errors described?

A. The firewall blocks DHCP traffic between the guest clients and the DHCP server.

B. The DHCP pool for guests does not assign users a DNS server address.

C. The MM and Mobility Controllers (MCs) have invalid certificates.

D. The Captive Portal is not enabled for the role to which these clients are assigned.

A network administrator configures this policy:

Users to which this policy applies are unable to receive IP addresses with DHCP. How should the administrator fix the issue?

A. Change user to any in the user any svc-dhcp permit rule.

B. Move the user any svc-dhcp permit rule to the bottom of the list.

C. Remove the deny rule from the policy.

D. Use the correct service alias in the user any svc-dhcp permit rule.

A company has a Mobility Master (MM) solution that manages Mobility Controllers (MCs) in several groups. The company has several WebCC licenses and wants to reserve these licenses for MCs in the Sunnyvale group only.

How can a network administrator achieve this goal?

A. Associate the MAC addresses for the Sunnyvale MCs with the licenses when they are generated.

B. Make sure to be at the Managed Network > Sunnyvale level in the MM Interface when the licenses are installed.

C. Install the licenses on the MM, and allocate them to a dedicated local pool for the Sunnyvale group.

D. Install the licenses directly on the MCs in the Sunnyvale group, and activate the licneses locally.

What is an advantage for a network administrator to use AirWave over a Mobility Master (MM)?

A. ability to gather and analyze historical user data, and monitor client association and network usage trends

B. scans wireless client settings and brings those settings in compliance with corporate security policies.

C. ability to monitor and manage a Mobility Controller (MC) to configure the WLAN

D. provides realtime firewall hits for client network troubleshooting

A company currently uses 802.11ac Wave 1 as a wireless solution. They want to upgrade to 802.11ac Wave2.

Which new feature will now be available with this upgrade?

A. band steering

B. multiple spatial streams

C. 40MHz channel bonding

D. multi-user MIMO (MU-MIMO)