During HPE BladeSystem implementation, you need to update firmware of the Virtual Connect modules installed in this enclosure. This enclosure is not managed by HPE OneView. Which tool can be used to update firmware in VC modules?
A. Onboard Administration
B. Insight Display
C. Virtual Connect Support Utility
D. Virtual Connect Manager
You are troubleshooting an issue with a ProLiant Service and need to revert to the initial configuration. During the process, you forget some of the previous configuration changes made. Which HPE tool can you use to recall all the configuration changes made?
A. IML Log
B. iLO Syslog
C. Active Health System Viewer
D. OneView Event Viewer
A customer has a requirement change where prior to decommissioning a server they must perform a secure erase of the server. Which iLO license should you include in the new proposal for server hard ware going forward?
A. HPE iLO Advanced
B. HPE iLO Standard
C. HPE iLO Essentials
D. HPE iLO Advanced Premium Security Edition
Your customer is concerned about the possibility of an attack via hard drive firmware exploits against their server infrastructure. Which new HPE ProLiant Gen10 technology protests against these attacks?
A. Secure Recovery
B. Common Access Card (CAC) two-factor authentication support
C. Firmware Runtime Validation
D. Commercial National Security Algorithms compliance
A customer with a DL380 Gen 10 server uses an HPE Smart Array controller with a 96 WATT Smart Storage Battery. They want to add 16 GB NVDIMMS in the remaining memory slots. They are concerned about retaining data if a power
outage occurs.
What can you explain to them about the Smart Storage Battery configuration to address their concerns?
A. They need an additional 12 WATT Smart Storage Battery.
B. The current battery will support both the NVDIMMS and the Smart Array controller.
C. they need an additional 96 WATT Smart Storage Battery.
D. The system cannot support the NVDIMMS.
A customer wants to evaluate the new feature in iLO5 that provides the ability to permanently erase all data on a server. What iLO5 license will the customer require for this proof of concept (PoC)?
A. iLO Advanced Premium Security
B. iLO Advanced
C. iLO Standard BladeSystem Edition
D. iLO Standard
A customer is concerned about protecting against attacks on their server firmware automatically. They want the ability to recover to authentic firmware in the unlikely event it becomes compromised. What should the customer do to accomplish this task?
A. install HPE iLO Advanced
B. use HPE OneView
C. Use system erase and reset
D. Install HPE iLO Advanced Premium Security Edition
Which tool can be used to verify the expected lifetime of the SSD drive?
A. HPE OneView
B. Option ROM Configuration for Arrays
C. HPE Composer
D. HPE Smart Storage Administrator
Your customer is concerned about the possibility of experiencing a PDos attack on their server infrastructure. Which new HPE ProLiant Gen10 feature can you demonstrate?
A. Commercial National Security Algorithms compliance
B. OpenLDAP support
C. Common Access Card (CAC) two-factor authentication support
D. Silicon Root of Trust
Which disk technology provides high throughput and lowest latency?
A. SATA 6Gb
B. SAS 12Gb
C. NVMe SSD
D. M.2 Solid State