HP2-T26 Online Practice Questions and Answers

What should a support engineer use to perform a firmware update to a c-Class PCI Expansion Blade?

A. OA CLI

B. HP SmartStart

C. Firmware Maintenance DVD

D. OA GUI

Which memory configuration types are supported in the Gen8 ProLiant Blade servers? (Select two.)

A. DDR2

B. SODIMM

C. SDIMM

D. RDIMM

E. UDIMM

You installed an FC HBA in mezzanine slot 2 of a BL460c G6 in a c7000 enclosure. In which interconnect bays should the FC interconnect be installed?

A. 1 and 2

B. 3 and 4

C. 5 and 6

D. 7 and 8

What should you use to check the overall health status of all the BL460c Gen8 servers you recently installed in a c7000 enclosure?

A. Power Manager

B. Array Configuration Utility

C. Onboard Administrator

D. Insight Control Server Deployment

When the enclosure management address is not configured, which tool is used to check the Onboard Administrator (OA) Service IP?

A. HP Systems Insight Manager

B. OA Management Homepage

C. Onboard Administrator CLI

D. Insight Display

How many power supplies are needed for an (N+N) configuration in a c7000 enclosure?

A. 3

B. 4

C. 5

D. 7

What happens during a Virtual Connect configuration restore?

A. The configuration restores without causing any service interruption to the server blades.

B. There is service interruption during the restore of the configuration.

C. A reboot of the entire enclosure is required for the new configuration to take effect.

D. A reboot of the Onboard Administrator is required in order to re-establish communication to the Virtual Connect module.

How is a backup of the Onboard Administrator (OA) performed?

A. by using the CLI of interconnect in bay 1

B. by using the GUI

C. by copying the activeoa.cfg file to the USB drive

D. by recording the configuration on a CD using CD-RW attached to the OA USB port

A customer is experiencing intermittent storage connectivity issues in their BladeSystem environment. After collecting the log files from the external storage system and the interconnects, you determine the problem is in the Onboard Administrator configuration.

Which step should you take next in the troubleshooting process?

A. Implement preventive measures.

B. Initiate the replacement procedure of the midplane.

C. Plan the repair procedure.

D. Verify if the solution is covered by a carepack.

The customer has a single Onboard Administrator (OA), which needs to be replaced. What should you do before you replace the OA?

A. Access the OA GUI or CLI and capture a system log.

B. Telnet or SSH to the OA and collect a showall.txt.

C. Browse to the OA and collect a script containing a list of the enclosure's current inventory.

D. Use a USB key and the Insight Display to save the configuration.