EW0-100 Online Practice Questions and Answers

What is the default value for the RIP garbagetime setting?

A. 30 seconds

B. 60 seconds

C. 120 seconds

D. 180 seconds

RIP version 2 uses a composite metric that includes link speed and delay.

A. True

B. False

Which command would you use to create a blackhole route that blocks traffic to the 10.0.0.0/8 network?

A. config iproute add 10.0.0.0/8 blackhole

B. config blackhole iproute add 10.0.0.0/8

C. config iproute add blackhole 10.0.0.0/8

D. None of these.

Which command would you use to determine the IP routes that are tracked by ESRP?

A. show esrp

B. show esrp detail

C. show esrp config

D. None of these.

Route advertisement messages have been altered to use a broadcast address. Which command would you use to change this back to the default setting?

A. config igmp multicast

B. config irdp multicast

C. config icmp multicast

D. config ecmp multicast

The default parameters for QP8 are:

A. Minimum bandwidth 0%, maximum bandwidth 100%, and low priority.

B. Minimum bandwidth 50%, maximum bandwidth 50%, and low priority.

C. Minimum bandwidth 100%, maximum bandwidth 0%, and low priority.

D. None of these.

How could you disable MAC address learning for ports 1-8 on a Summit5i switch?

A. Enter the command disable ports learning 1-8.

B. Enter the command disable mac-learning ports 1-8.

C. Enter the command disable ports mac-learning 1-8.

D. Enter the command disable learning ports 1-8.

How would you create a VLAN named corporate?

A. create vlan corporate

B. config vlan corporate

C. enable vlan corporate

D. None of these.

Name one of the two user authentication protocols supported by ExtremeWare.

A. Kerberos

B. NAS

C. RADIUS

D. TACACS+

When enabling load sharing in an Extreme switch, only a single switch must be configured. The switches will auto-negotiate the port sharing settings via the EDP protocol.

A. True

B. False