E20-616 Online Practice Questions and Answers

What is the maximum amount of cache that can be configured in a Symmetrix VMAX 20K?

A. 128 GB / engine 1 TB / array

B. 128 GB / engine 512 / array

C. 256 GB / engine 1 TB / array

D. 256 GB / engine 2 TB / array

What is the status of the R1 and R2 devices after a SRDF Failback operation is performed?

A. R1 is Read-Write R2 is Write Disabled

B. R1 is Write Disabled R2 is Read-Write

C. R1 is Read-Write R2 is Read-Only

D. R1 is Read-Only R2 is Read-Write

What is a characteristic of VMAX 20K Power Vault Hypers (PVDs)?

A. PVDs are 5 GB in size.

B. There are two PVDs per physical disk drive.

C. Space is allocated for PVDs in Global Memory.

D. There are four PVDs per physical disk drive.

A CE is dispatched to replace a Drive. After logging into a Symmetrix VMAX 40K running Enginuity 5876.159.102 Simplified SymmWin is automatically launched. How should the CE proceed?

A. Select Service Request Number then click Run Task

B. Close Simplified SymmWin and select SymmWin from the desk top, then select Procedure Wizard

C. Log off then log on using a Break Fix Credential

D. Simplified SymmWin does not support VMAX 40K

Which Enginuity version introduced Simplified Symmwin?

A. 5876

B. 5875

C. 5773

D. 5772

What is the SPS hold-up time limitation in minutes?

A. 5

B. 1

C. 2

D. 4

What is the RAID level used in Power Vault devices?

A. No RAID

B. RAID 5

C. RAID 6

D. RAID 1

You are using the SymmWin simulator to test an upgrade. What is required for a successful test?

A. SymmWin with the same system Enginuity level and two IMPL.Bins

B. The Service Processor and two upgrade impl.Bins of the same system

C. The Service Processor and the original IMPL.Bins of the same system

D. SymmWin with the same Enginuity level and the upgrade impl.Bins

On a VMAX 10K, what is a Power Vault requirement?

A. 20 vault devices per engine

B. 32 vault devices per engine

C. Vault devices are configured on the first five drives of all DAEs.

D. Five vault drives per DA slice

Refer to the Exhibit.

Which cable should be connected to the VMAX Service processor illustrated as '5'?

A. Ethernet: CS-Spare

B. Ethernet: Highest Engine number

C. Ethernet: Customer Network

D. Ethernet: Lowest Engine number