76940X Online Practice Questions and Answers

A support engineer is experiencing some difficulty correlating the error messages and logs from different systems in the ACP 4200.

What should the engineer do to fix this problem?

A. Use the VMware integrated time server to supply time to all systems.

B. Manually synchronize the time on all the ACP systems to a correct vCenter.

C. Use the MSC NTP service tied to external NTP time servers to synchronize the time on all systems.

D. The VSP switches have NTP servers built into them, and all other systems can use NTP to synchronize to them.

Which feature in Avaya Orchestrator allows a support engineer to select the management protocols and credentials of the equipment that is to be monitored within the ACP 4200?

A. Monitoring Setup

B. Orchestrator Security Center

C. Device and Credentials Editor

D. ACP Configuration Wizard

A junior support engineer has been told by the support manager that summary status information for the ACP 4200 can be found in the Dashlets.

Where would the engineer go to view this information?

A. Login to Avaya Orchestrator's ACP Configuration Wizard link.

B. Login to Avaya Orchestrator's Homepage.

C. Login to the Management Server Console's Desktop.

D. Login to the Management Server Console's ACP Configuration Wizard link.

A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The system has two pairs of ServerTech PDUs.

Which statement about the PDU firmware file describes the upgrade process that the engineer needs to follow?

A. It will need to be uploaded to all 4 PDUs.

B. It will need to be uploaded to each PDU Management Web Interface.

C. It will need to be uploaded to one PDU. This PDU will then distribute the file to the remaining 3 PDUs.

D. It will need to be uploaded to Orchestrator. Orchestrator will then distribute the file to the 4 PDUs.

Which two statements describe Product Support Notices (PSNs) from Avaya? (Choose two.)

A. PSNs provide information about issues that have been reported.

B. PSNs are typically issued along with the Release Notes of a product.

C. PSNs may contain potential fixes or workarounds.

D. PSNs are only available on the psn.avaya.com web site.

A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0, and is upgrading the Extreme Network VSP switches to release 7.1.

Which two applications available on the on the MSC would the engineer typically use for the upgrade process? (Choose two.)

A. Avaya Orchestrator

B. PuTTY

C. WinSCP

D. Enterprise Device Manager

A support engineer is tasked with upgrading a CPOD 2.1 system to ACP 4200 4.0. Which statement about the upgrade process is true?

A. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, and a direct upgrade path is supported.

B. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.

C. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is not supported.

D. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, but a direct upgrade path is only partially supported.

When deploying the vCenter update, there are certain parameters that must be used.

Which IP address should be used for the Network 1 IP Address?

A. The Localhost IP address for your datacenter subnet IP interface

B. The datacenter facing IP interface IP address and a 32 bit mask

C. The Internet facing IP interface IP address and mask

D. A temporary IP, from the Management subnet, not already in use

Before downloading and applying a PDU patch, you must determine the type of PDU the ACP 4200 is using.

Which two kinds of PDUs are valid? (Choose two.)

A. Switched

B. Synchronized

C. Smart

D. Stationary

E. Static

A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The engineer is upgrading the ESXi hosts to VMware ESXi 6.5.

Which two statements about this upgrade process are true? (Choose two.)

A. ESXi hosts are upgraded all at the same time.

B. ESXi hosts are upgraded one after another.

C. One baseline group must be created using vSphere Update Manager to be used for all ESXi hosts.

D. Separate baseline groups must be created using vSphere Update Manager for each individual ESXi host.