3100 Online Practice Questions and Answers

There are two GUI-based access tools available: Avaya site administration (ASA) and system management interface (SMI). Which statement correctly differentiates between ASA and SMI?

A. Both SMI and ASA can perform the same administration tasks but ASA is being replaced by SMI.

B. Both SMI and ASA can perform the same administration tasks but SMI is for technicians and ASA is for customers.

C. SMI provides access to less frequent administration, installation and upgrade functions, while ASA provides access to day-to-day administration functions.

D. Old hardware and software (Pre ?5.x) is administered using SMI, while current hardware and software (5.x and later) is administered using ASA.

You want a user's station to be able to dial extension 5605 and 5608 only.

Which station configuration will achieve this?

A. Assign COR 11 to user' station, In COR11 Set COR-to COR calling permission = `n' for all except COR 10. Assign COR to 5605 and 5608. Ensure that these two CORs are not assigned to any other station object.

B. The FRL = 7to user's station. FRL = 7 to station 5606 and 5608. Set FRL for all other stations to 6 and lesser

C. Assign COR 10 to user's station. In COR 11, set CPR-to-COR calling permission = `n' for all except. Assign COR 11 to 5605 and 5608. Ensure that these two CORs are not assigned to any other object.

D. The FRL = 5 to user's station, FRL = 7 to station 5606 and 5608. Set FRL for all other stations to 5 or lesser.

Your customer had a short WAN outage and you want to know If all of the gateways have re-registered with the Communication Manager server. Which Interface and command must be used?

A. ASA with a display process-status command

B. SMI with a process status command

C. SMI with a status summary command

D. ASA with a status media-gateway command

All release ox and later Avaya Aura?Communication Manager (CM) deployments support secure link access: SAL for remote access to the server and alarm notification from the server to the support engineer?

Which hardware or software is required at the customer site for SAL support of the CM server?

A. SAL software is required and uses a separate SAL server.

B. SAL software is required and uses a secure external modem.

C. SAL software is part of System Platform and requires no additional hardware.

D. SAL software is part of System Platform and uses a remote maintenance board (RMB) that must be installed in the server.

When adding an IP Station type 96xx, which statement is true regarding the port field?

A. It is automatically populated by the system as "IP".

B. It must be populated as "SOOOXX"

C. It must be populated with an available port on an MM712 or TN2214

D. It must be populated with an available port on the LAN switch.

Which two Fields and Settings must be verified on the system-parameters customer- options form when adding 46xx or 96xx type telephones? (Choose two)

A. Maximum Concurrently Registered IP Stations greater than "0"

B. Maximum Media Gateway VAL Sources greater than "0"

C. Maximum Off-PBX Telephones greater than "0"

D. IP Stations field in "y"

E. Digital Stations field In "y"

Which ASA main menu option displays the capacity of the Communication Manager?

A. Advanced

B. Tasks

C. General

D. Fault and Performance

To which two Communication Manager forms are FRLs assigned? (Choose two.)

A. COS

B. COR

C. Route Pattern

D. Station

A customer wants to connect two branch offices with an ISDN trunk, where each branch office has a PBX system. Which Service Type should be selected when configuring the trunk?

A. Tie

B. Tandem

C. Central Office (CO)

D. Direct Inward Dial (DID)

Which type of traffic does a DID trunk support?

A. Incoming and outgoing calls between the telephone system and the local central office

B. Customer-provided equipment to the telephone system

C. Incoming calls routed directly to internal extensions

D. Outgoing calls between telephone system and the local central office